Fluke Networks IntelliTone Pro 200 Probe - probe
$204.48
Mfg # MT-8200-63A
CDW # 783550
Know your gear
The IntelliTone™ Pro Toner and Probe Series from Fluke Networks is the first toner and probe to offer digital and analog signaling all in one tool. That means it’s equipped with the most powerful cable location technologies for any work environment. Use digital mode to trace and locate data cabling safely and effectively on active networks. Use analog mode to isolate individual wire pairs, and trace voice, audio, and video cabling.
The IntelliTone™ Pro Toner and Probe Series from Fluke Networks gives you superior vision for locating cables hidden in floors, ceilings, walls, and in bundles. Its breakthrough digital technology makes it the first tool to tone and trace safely and effectively on active networks.
The IntelliTone Pro 200 Probe features a CABLEMAP capability that identifies common cable miswires in twisted pair cabling. Complete per-pin verification of TIA568 wiring identifies the exact wire that is open, shorted or miswired. LED lights and distinctive tones clearly indicate miswires. The built-in Cablemap feature eliminates the need to carry separate tools or returning to the far-end to replace the toner with a mapper. The IntelliTone Pro 200 Kit is the all-in-one tool to locate and map Category 5 cabling even when plugged into a switch, and verify link service after moves, adds and changes.
The IntelliTone™ Probe's signal selection thumbwheel lets you choose which tone type to use. Controlled LED signal indicators and audio tones simplify signal interpretation and take the guesswork out of cable location, reducing even the toughest locating problems into a few minutes' work.
IntelliTone Pro 200 Probe Includes: IntelliTone Pro 200 Probe, RJ11 and RJ 45 patch cables, lanyard, owners CD and quick start guide, and 9 volt battery.
The IntelliTone™ Pro Toner and Probe Series from Fluke Networks gives you superior vision for locating cables hidden in floors, ceilings, walls, and in bundles. Its breakthrough digital technology makes it the first tool to tone and trace safely and effectively on active networks.
The IntelliTone Pro 200 Probe features a CABLEMAP capability that identifies common cable miswires in twisted pair cabling. Complete per-pin verification of TIA568 wiring identifies the exact wire that is open, shorted or miswired. LED lights and distinctive tones clearly indicate miswires. The built-in Cablemap feature eliminates the need to carry separate tools or returning to the far-end to replace the toner with a mapper. The IntelliTone Pro 200 Kit is the all-in-one tool to locate and map Category 5 cabling even when plugged into a switch, and verify link service after moves, adds and changes.
The IntelliTone™ Probe's signal selection thumbwheel lets you choose which tone type to use. Controlled LED signal indicators and audio tones simplify signal interpretation and take the guesswork out of cable location, reducing even the toughest locating problems into a few minutes' work.
IntelliTone Pro 200 Probe Includes: IntelliTone Pro 200 Probe, RJ11 and RJ 45 patch cables, lanyard, owners CD and quick start guide, and 9 volt battery.
Add to Compare
Enhance your purchase
Fluke Networks IntelliTone Pro 200 Probe is rated4.67 out of5 by3.
Rated 5 out of 5 byJohn4120 from nullI have been doing this for a long time and I can honestly say "Where was this 10 years ago?" This toner has made life so much easier it is amazing!!! A toner that can work on a live circuit is really a piece of equipment to have in your arsenal. If you are trying to find that one port in an office that isn't hooked up and have no idea where it could be this is a life saver. I have since re-done my entire building because hardly anything was labeled. With the course and fine tuning it lets me find the right vicinity in the patch panel first and then find the exact port, most of the time I have it toned, verified, and marked in less time than it takes me to walk across the building to retrieve the other piece of the toner. A must have for anyone re-cabling their network or starting from scratch. Price point is excellent also!
Date published: 2014-08-12T00:00:00-04:00
Rated 5 out of 5 byDropkick from nullI have two of these devices (probe and toner) for each campus. These devices are fantastic, you can easily detect cables that are patched into a switch or a single strand in a bundle of cables. Highly recommended.
Date published: 2014-01-05T00:00:00-05:00
Rated 5 out of 5 byKrantar from nullWe just purchased another probe/toner combo and these work exactly as they're advertised. It can find cable miswires as well as assist with pinpointing a cables location. It still detects a signal with large amounts of UTP cables within very close proximity to the 'target' cable. My only complaint is that they are not particularly sturdy, so be careful not to drop it.
Date published: 2013-08-02T00:00:00-04:00