Quick tech specs
- Smart Line-Interactive Sine Wave 3U RackMountable Uninterrupted Power Supply w/Network Card Options provides Battery Backup through blackouts voltage fluctuations and surge
- Automatic Voltage Regulation (AVR) corrects brownouts and over-voltages without using battery power
- 20 min. runtime half load; 8.5 min. full load
- Tripp Lite is now a part of the Eaton family
- Ideal for servers network and telecom hardware
- 230V C20 inlet; 8 C13 and 1 C19 outlets
- 2 year Tripp Lite Warranty
Know your gear
KEY POINTS
5000VA / 3750 watt max. output power capacity compatible with International 230V 50/60Hz input voltage
3U rack/tower UPS installs in standard 19 inch rack enclosures with an installed depth of only 75 cm
Protects sensitive networking equipment from blackouts, voltage fluctuations and transient surges
Line Interactive Automatic Voltage Regulation (AVR) corrects 230V nominal input from 170 to 282VAC back to usable 230V levels without consuming battery power
AVR circuits boost undervoltages from 170 to 199V by 12% and reduce overvoltages from 245 to 282V by 12%
Network interfaces support simultaneous communications via USB, DB9 serial or contact closure and SNMPWEBCARD slot
Included PowerAlert UPS monitoring software supports safe unattended shutdown, monitoring and control via local connected servers, plus any number of additional servers over IP
Communications ports support on-battery, low-battery, power-restored, AC-voltage, DC-voltage, output current monitoring, battery charge current, battery capacity, internal UPS temperature, AC line frequency, timed inverter shutoff and activate self-test
Built-in Emergency Power Off (EPO) interface with cable
Sine wave output in AC and battery mode
Expandable runtime with optional BP48V60RT3U external battery packs
Half/full load runtime of 27 / 10 minutes with internal batteries
Includes 11 output receptacles (3 C19 / 8 C13)
Hardwire input AC connection
3 stage metered LEDs offer current monitoring and battery charge level
Mains power and voltage regulation LEDs offer at-a-glance power status information
Front panel switches support self-test and alarm cancel functions
Included adjustable mounting rails support installation in 4 post 19 inch racks
Supports 2 post rackmount installation with optional 2POSTRMKIT accessory
Supports upright tower placement with optional 2-9USTAND accessory
CE, GOST, SASO listed
2 year manufacturer's product warranty
TYPICAL APPLICATIONS
Ideal for protection of sensitive electronics in any application calling for upright tower or 19 inch rackmount UPS protection. Common applications include any mix of servers, workstations, hubs, routers, concentrators, IP telephony and traditional PBX switching systems
PACKAGE INCLUDES
SMX5000XLRT3U UPS system
PowerAlert Software and Cabling
Mounting hardware for 4 post rackmount installation
Warranty information
Instruction manual
5000VA / 3750 watt max. output power capacity compatible with International 230V 50/60Hz input voltage
3U rack/tower UPS installs in standard 19 inch rack enclosures with an installed depth of only 75 cm
Protects sensitive networking equipment from blackouts, voltage fluctuations and transient surges
Line Interactive Automatic Voltage Regulation (AVR) corrects 230V nominal input from 170 to 282VAC back to usable 230V levels without consuming battery power
AVR circuits boost undervoltages from 170 to 199V by 12% and reduce overvoltages from 245 to 282V by 12%
Network interfaces support simultaneous communications via USB, DB9 serial or contact closure and SNMPWEBCARD slot
Included PowerAlert UPS monitoring software supports safe unattended shutdown, monitoring and control via local connected servers, plus any number of additional servers over IP
Communications ports support on-battery, low-battery, power-restored, AC-voltage, DC-voltage, output current monitoring, battery charge current, battery capacity, internal UPS temperature, AC line frequency, timed inverter shutoff and activate self-test
Built-in Emergency Power Off (EPO) interface with cable
Sine wave output in AC and battery mode
Expandable runtime with optional BP48V60RT3U external battery packs
Half/full load runtime of 27 / 10 minutes with internal batteries
Includes 11 output receptacles (3 C19 / 8 C13)
Hardwire input AC connection
3 stage metered LEDs offer current monitoring and battery charge level
Mains power and voltage regulation LEDs offer at-a-glance power status information
Front panel switches support self-test and alarm cancel functions
Included adjustable mounting rails support installation in 4 post 19 inch racks
Supports 2 post rackmount installation with optional 2POSTRMKIT accessory
Supports upright tower placement with optional 2-9USTAND accessory
CE, GOST, SASO listed
2 year manufacturer's product warranty
TYPICAL APPLICATIONS
Ideal for protection of sensitive electronics in any application calling for upright tower or 19 inch rackmount UPS protection. Common applications include any mix of servers, workstations, hubs, routers, concentrators, IP telephony and traditional PBX switching systems
PACKAGE INCLUDES
SMX5000XLRT3U UPS system
PowerAlert Software and Cabling
Mounting hardware for 4 post rackmount installation
Warranty information
Instruction manual
Add to Compare